Hi, My projector shuts down randomly. Sometimes it will shutdown after 5 minutes and sometimes after 30 minutes of usage. Be it homescreen or playing videos, the screen freezes for two seconds and shuts down. Please help, what might be the issue.
Re: Fan / temperature issue
Fan was ramping up-and-down every couple seconds. I watched a video on disassembling my H1 However I only needed to pop the top loose and move it to the side without disconnecting any wires. That gave me access to the fan. I then removed the 4 small phillips head screws and was able to lift the fan up and off to the side. After thoroughly cleaning the fan with Q tips I noticed that where the air enters the unit in the back it passes through Aluminum fins before hitting the fan. Those fins were completely plugged with dust and dirt. I then cleaned the fins with a small brush and reinstalled the fan and popped the cover back on and now the unit runs as it did when new. The operating temperature prior to cleaning was hovering around 70ﾟC and now It hangs around 57ﾟC with a very low speed. Hope this helps someone.
from one day to another the focus of my halo isnt working anymore. I cant even adjust the focus with the remote control.
the distance at which i have a sharp projection is more or less 30cm.
how can i fix that issue?
@ericmoolin you are right. Chromecast plugged into HDMI connector of the beamer and using voice commands with google assistant to "turn on" the beamer (or rather said, turn on the chromecast stick). It will start the beamer in the beamer UI (no need to switch back from Chromecast HDMI port to Beamer UI).